The scalpel is inserted into the slot in the container until the is heard. The handle is withdrawn & the blade remains sealed inside for later disposal.
Setting up the BladeFLASK and Bracket
The Qlicksmart BladeFLASK scalpel blade remover is designed for single-handed operation and comprises two components - Flask and Bracket.
Bracket:
The bracket is an integral part of the overall system and is supplied separately with instructions including a template to simplify placement.
The mounting bracket is fixed to a wall, bench or trolley at each clean-up site or point of use through a strong, adhesive, double-sided tape is pre-fixed to the rear of the bracket. Additional mounting screws are required should they be required.
BladeFLASK:
The BladeFLASK unit is then mounted onto the bracket.
To replace or remove the BladeFLASK, simply slide out the old BladeFLASK and slide in the replacement.
Removing blades using BladeFLASK
The simply safer Qlicksmart method
Place blade flat onto landing pad - Sharp Edge Right / Tang “UP”
Push scalpel handle into
BladeFLASK parallel to landing pad - Until pronounced CLICK
Remove handle - Blade contained in BladeFLASK (removes up to 100 blades)
Scalpel blade removal can now be done in a 'click'!
"A very versatile and user-friendly device. Environmentally friendly as it eliminates the haphazard disposal of sharps. One hand operation is its unique feature seldom found in similar scalpel removal devices. A good innovative device."
Bernard Tan, Senior Medical Technologist, Histopathology Laboratory, Singapore General Hospital
is heard. The handle is withdrawn & the blade remains sealed inside for later disposal.
