BladeFlask EVO Scalpel Blade Remover BUNDLE
In Stock
AUD 39.95
This is a bundle of the BladeFlask EVO and Mounting Bracket.
The Qlicksmart BladeFlask EVO is able to accommodate even more types of BP scalpel handles and blades than any other remover including large autopsy scalpels, Barron, bulbous, thick and round handles, hexagonal shaped versions, and the new Ergonomic handles – giving you greater freedom in using any scalpel you want.
This bundle adds the Mounting Bracket which is specifically made for Qlicksmart BladeFLASK and BladeFlask EVO scalpel blade removers to be mounted on any flat surface.
It is so simple to use with just one hand. Embrace safety with the new standard in scalpel blade removals. Hear the QLICK™ sound and be safe.
-
- OSHA compliant with single-handed activation when used with the reusable Mounting Bracket (Sold Separately)
- Shuts off after maximum capacity is reached
- Compatible with all scalpel blades, including PM60A, PM60B ,and PM70
- Compatible with most standard BP scalpel handles including Barron, hexagonal, bulbous, Ergonomic, PM6, and PM8 handles
- Puncture-proof and tested to meet United Nations Transport Requirements for Dangerous Goods
- Compliant to International Standards and Regulations
To send an enquiry, please Click HERE.
Note: The colour of the product is dependent on your region’s sharps container regulations.
-
- RED – USA, Central, and South America markets only
- YELLOW – Oceania, Asia, Europe, Africa, and Canada markets only
- Orange Label – UK and Ireland markets only
Please note that website orders for this item is only available to Australia. For orders in other locations, please contact us to find the distributor in your area.
Please contact us to find the distributor in your area. Thanks
Specifications
-
- Blade capacity: Approximately 100 blades
- All commercially available scalpel blades including (but not limited to) up to size PM 60A, PM60B, PM70.
- All commercially available BP scalpel handles including (but not limited to) PM6, PM7, Barron, and the new Ergonomic handles.
*some brands may not work with Qlicksmart BladeFlask EVO
Brochures
FAQ
When should I replace my BladeFlask EVO?
The BladeFlask EVO shuts-off automatically after approximately 100 blades are removed, and then must be disposed and replaced. Please check the count-down indicator which counts down from 100 to 0, then ‘FULL’ to see when you will need to replace the BladeFlask EVO.
Who should be using BladeFlaskEVO?
Anyone who uses scalpel blades can use the BladeFlask EVO, including those working in outpatient centres, clinics, laboratories, and mortuaries. The BladeFlask EVO was designed as the next generation of the BladeFLASK, and can now remove large blades like those used in mortuaries, and accommodates barron, bulbous, circular or hexagonal handles used for plastic surgeries and in some dental clinics.
How do I dispose of the BladeFlask EVO
Please follow your organisation’s infection control guidelines on the disposal time-frame for used BladeFlask EVO, regardless of whether the unit has shut off. Once the BladeFlask EVO has shut-off, it must be disposed of as medical waste. Please also follow your organisation’s standard procedures for disposal of medical waste that contain sharps. The BladeFlask EVO has been tested in accordance with the provision of the United Nations Transport of Dangerous Goods, Chapter 6.
Why do I need a Mounting Bracket?
The Mounting Bracket helps to position the BladeFlask EVO so that it can remove blades single-handedly. The Mounting Bracket also allows the BladeFlask EVO to be mounted on a vertical or horizontal surface (eg on a wall or bench), so that blades can be removed at point of use.
How do I install the Mounting Bracket?
You can affix the Mounting Bracket via the industrial-strength double-sided tape, or by screws and lugs which are included in the packaging. A fitting template has been included in the Mounting Bracket packaging to indicate the clearance required for easy installation.
When should I install a new Mounting Bracket?
You can re-use the Mounting Bracket until the current bracket starts to become loose or it no longer holds the BladeFlask EVO firmly.
Why are there two different colours of the Qlicksmart BladeFlask EVO?
The Qlicksmart BladeFlask EVO has been designed to comply with the international standard colours for medical sharps waste. The red unit complies with US, Central America, and South America standards, and the yellow unit complies with most other countries’ standards. Please consult your organization to determine which unit complies with local standard colours for medical sharps waste.
Is the BladeFlask EVO latex free?
YES. The BladeFlask EVO body is made of a thermoplastic, acrylonitrile butadiene styrene (ABS) and Acetyl, and the inner mechanism in made from ABS and Stainless Steel. The Mounting Bracket is made from acrylonitrile butadiene styrene (ABS).
